Leafhopper-inspired reversibly switchable antireflection coating with sugar apple-like structure arrays.

Optical coatings with reversibly tunable antireflective characteristics hold a tremendous potential for next generation optical energy-related applications. Bioinpsired by the camouflage behavior of small yellow leafhoppers, silica hollow sphere/shape memory polymer composites are self-assembled using a non-lithography-based approach. The average visible transmittance of the as-patterned hierarchical structure array-covered substrate is increased by ca. 6.3% at normal incident, and even improved by more than 20% for an incident angle of 75°. Interestingly, the broadband omnidirectional antireflection performance can be reversibly erased and recovered by applying external stimuli under ambient conditions. To gain a better understanding, its reversibility, mechanical robustness, and the structure-shape effect on the antireflective properties are systematically investigated in this research.

Enhanced Photovoltaic Performance of Inverted Perovskite Solar Cells through Surface Modification of a NiOx-Based Hole-Transporting Layer with Quaternary Ammonium Halide-Containing Cellulose Derivatives.

In this study, we positioned three quaternary ammonium halide-containing cellulose derivatives (PQF, PQCl, PQBr) as interfacial modification layers between the nickel oxide (NiOx) and methylammonium lead iodide (MAPbI3) layers of inverted perovskite solar cells (PVSCs). Inserting PQCl between the NiOx and MAPbI3 layers improved the interfacial contact, promoted the crystal growth, and passivated the interface and crystal defects, thereby resulting in MAPbI3 layers having larger crystal grains, better crystal quality, and lower surface roughness. Accordingly, the photovoltaic (PV) properties of PVSCs fabricated with PQCl-modified NiOx layers were improved when compared with those of the pristine sample. Furthermore, the PV properties of the PQCl-based PVSCs were much better than those of their PQF- and PQBr-based counterparts. A PVSC fabricated with PQCl-modified NiOx (fluorine-doped tin oxide/NiOx/PQCl-0.05/MAPbI3/PC61BM/bathocuproine/Ag) exhibited the best PV performance, with a photoconversion efficiency (PCE) of 14.40%, an open-circuit voltage of 1.06 V, a short-circuit current density of 18.35 mA/cm3, and a fill factor of 74.0%. Moreover, the PV parameters of the PVSC incorporating the PQCl-modified NiOx were further enhanced when blending MAPbI3 with PQCl. We obtained a PCE of 16.53% for this MAPbI3:PQCl-based PVSC. This PQCl-based PVSC retained 80% of its initial PCE after 900 h of storage under ambient conditions (30 °C; 60% relative humidity).

Lignin-Derived Quinone Redox Moieties for Bio-Based Supercapacitors.

Because of their rapid charging and discharging, high power densities, and excellent cycling life stabilities, supercapacitors have great potential for use in electric vehicles, portable electronics, and for grid frequency modulation. The growing need for supercapacitors that are both efficient and ecologically friendly has generated curiosity in developing sustainable biomass-based electrode materials and electrolytes. Lignin, an aromatic polymer with remarkable electroactive redox characteristics and a large number of active functional groups, is one such candidate for use in renewable supercapacitors. Because its chemical structure features an abundance of quinone groups, lignin undergoes various surface redox processes, storing and releasing both electrons and protons. Accordingly, lignin and its derivatives have been tested as electroactive materials in supercapacitors. This review discusses recent examples of supercapacitors incorporating electrode materials and electrolytes derived from lignin, focusing on the pseudocapacitance provided by the quinone moieties, with the goal of encouraging the use of lignin as a raw material for high-value applications. Employing lignin and its derivatives as active materials in supercapacitor electrodes and as a redox additive in electrolytes has the potential to minimize environmental pollution and energy scarcity while also providing economic benefits.

Recent Progress in Conducting Polymer Composite/Nanofiber-Based Strain and Pressure Sensors.

The Conducting of polymers belongs to the class of polymers exhibiting excellence in electrical performances because of their intrinsic delocalized π- electrons and their tunability ranges from semi-conductive to metallic conductive regime. Conducting polymers and their composites serve greater functionality in the application of strain and pressure sensors, especially in yielding a better figure of merits, such as improved sensitivity, sensing range, durability, and mechanical robustness. The electrospinning process allows the formation of micro to nano-dimensional fibers with solution-processing attributes and offers an exciting aspect ratio by forming ultra-long fibrous structures. This review comprehensively covers the fundamentals of conducting polymers, sensor fabrication, working modes, and recent trends in achieving the sensitivity, wide-sensing range, reduced hysteresis, and durability of thin film, porous, and nanofibrous sensors. Furthermore, nanofiber and textile-based sensory device importance and its growth towards futuristic wearable electronics in a technological era was systematically reviewed to overcome the existing challenges.

Fabrication and Characterization of an Efficient Inverted Perovskite Solar Cells with POSS Passivating Hole Transport Layer.

Polyhedral oligomeric silsesquioxane (POSS), featuring a hollow-cage or semi-cage structure is a new type of organic-inorganic hybrid nanoparticles. POSS combines the advantages of inorganic components and organic components with a great potential for optoelectronic applications such as in emerging perovskite solar cells. When POSS is well dispersed in the polymer matrix, it can effectively improve the thermal, mechanical, magnetic, acoustic, and surface properties of the polymer. In this study, POSS was spin-coated as an ultra-thin passivation layer over the hole transporting layer of nickel-oxide (NOx) in the structure of a perovskite solar cell. The POSS incorporation led to a more hydrophobic and smoother surface for further perovskite deposition, resulting in the increase in the grain size of perovskite. An appropriate POSS passivation layer could effectively reduce the recombination of the electron and hole at grain boundaries and increase the short-circuit current from 18.0 to 20.5 mA·cm-2. Moreover, the open-circuit voltage of the cell could slightly increase over 1 V.

Antibacterial Activity and Protection Efficiency of Polyvinyl Butyral Nanofibrous Membrane Containing Thymol Prepared through Vertical Electrospinning.

Human safety, health management, and disease transmission prevention have become crucial tasks in the present COVID-19 pandemic situation. Masks are widely available and create a safer and disease transmission-free environment. This study presents a facile method of fabricating masks through electrospinning nontoxic polyvinyl butyral (PVB) polymeric matrix with the antibacterial component Thymol, a natural phenol monoterpene. Based on the results of Japanese Industrial Standards and American Association of Textile Chemists and Colorists methods, the maximum antibacterial value of the mask against Gram-positive and Gram-negative bacteria was 5.6 and 6.4, respectively. Moreover, vertical electrospinning was performed to prepare Thymol/PVB nanofiber masks, and the effects of parameters on the submicron particulate filtration efficiency (PFE), differential pressure, and bacterial filtration efficiency (BFE) were determined. Thorough optimization of the small-diameter nanofiber-based antibacterial mask led to denser accumulation and improved PFE and pressure difference; the mask was thus noted to meet the present pandemic requirements. The as-developed nanofibrous masks have the antibacterial activity suggested by the National Standard of the Republic of China (CNS 14774) for general medical masks. Their BFE reaches 99.4%, with a pressure difference of <5 mmH2O/cm2. The mask can safeguard human health and promote a healthy environment.

Enhanced Photovoltaic Properties of Perovskite Solar Cells by Employing Bathocuproine/Hydrophobic Polymer Films as Hole-Blocking/Electron-Transporting Interfacial Layers.

In this study, we improved the photovoltaic (PV) properties and storage stabilities of inverted perovskite solar cells (PVSCs) based on methylammonium lead iodide (MAPbI3) by employing bathocuproine (BCP)/poly(methyl methacrylate) (PMMA) and BCP/polyvinylpyrrolidone (PVP) as hole-blocking and electron-transporting interfacial layers. The architecture of the PVSCs was indium tin oxide/poly(3,4-ethylenedioxythiophene):polystyrenesulfonate/MAPbI3/[6,6]-phenyl-C61-butyric acid methyl ester/BCP based interfacial layer/Ag. The presence of PMMA and PVP affected the morphological stability of the BCP and MAPbI3 layers. The storage-stability of the BCP/PMMA-based PVSCs was enhanced significantly relative to that of the corresponding unmodified BCP-based PVSC. Moreover, the PV performance of the BCP/PVP-based PVSCs was enhanced when compared with that of the unmodified BCP-based PVSC. Thus, incorporating hydrophobic polymers into BCP-based hole-blocking/electron-transporting interfacial layers can improve the PV performance and storage stability of PVSCs.

Preparations of Tough and Conductive PAMPS/PAA Double Network Hydrogels Containing Cellulose Nanofibers and Polypyrroles.

To afford an intact double network (sample abbr.: DN) hydrogel, two-step crosslinking reactions of poly(2-acrylamido-2-methylpropanesulfonic acid) (i.e., PAMPS first network) and then poly(acrylic acid) (i.e., PAA second network) were conducted both in the presence of crosslinker (N,N'-methylenebisacrylamide (MBAA)). Similar to the two-step processes, different contents of 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) oxidized cellulose nanofibers (TOCN: 1, 2, and 3 wt.%) were initially dispersed in the first network solutions and then crosslinked. The TOCN-containing PAMPS first networks subsequently soaked in AA and crosslinker and conducted the second network crosslinking reactions (TOCN was then abbreviated as T for DN samples). As the third step, various (T-)DN hydrogels were then treated with different concentrations of FeCl3(aq) solutions (5, 50, 100, and 200 mM). Through incorporations of ferric ions into (T-)DN hydrogels, notably, three purposes are targeted: (i) strengthen the (T-)DN hydrogels through ionic bonding, (ii) significantly render ionic conductivity of hydrogels, and (iii) serve as a catalyst for the forth step to proceed with in situ chemical oxidative polymerizations of pyrroles to afford polypyrrole-containing (sample abbr.: Py) hydrogels [i.e., (T-)Py-DN samples]. The characteristic functional groups of PAMPS, PAA, and Py were confirmed by FT-IR. Uniform microstructures were observed by cryo scanning electron microscopy (cryo-SEM). These results indicated that homogeneous composites of T-Py-DN hydrogels were obtained through the four-step process. All dry samples showed similar thermal degradation behaviors from the thermogravimetric analysis (TGA). The T2-Py5-DN sample (i.e., containing 2 wt.% TOCN with 5 mM FeCl3(aq) treatment) showed the best tensile strength and strain at breaking properties (i.e., σTb = 450 kPa and εTb = 106%). With the same compositions, a high conductivity of 3.34 × 10-3 S/cm was acquired. The tough T2-Py5-DN hydrogel displayed good conductive reversibility during several "stretching-and-releasing" cycles of 50-100-0%, demonstrating a promising candidate for bioelectronic or biomaterial applications.

Polypyrrole/Carbon Nanotube Freestanding Electrode with Excellent Electrochemical Properties for High-Performance All-Solid-State Supercapacitors.

In this study, a facile and environmentally friendly method was used to prepare a freestanding supercapacitor electrode displaying excellent areal capacitance and good cycle life performance. First, we prepared polypyrrole nanoparticles (PPyNP) through a simple in situ chemical polymerization using the plant-derived material curcumin as a bioavailable template. A PPyNP/f-CNT freestanding composite electrode of high mass loading (ca. 14 mg cm-2) was prepared after blending the mixtures of the prepared PPyNP and functionalized CNTs (f-CNTs). The performance of the as-prepared material as a supercapacitor electrode was evaluated in a three-electrode setup using aqueous 1 M H2SO4 as the electrolyte. The PPyNP/f-CNT freestanding composite electrode exhibited a high areal capacitance of 4585 mF cm-2 and a corresponding volumetric capacitance of 176.35 F cm-3 at a current density of 2 mA cm-2. A symmetric all-solid-state supercapacitor assembled using two identical pieces of PPyNP/f-CNT composite electrodes exhibited maximum areal energy and power density of 129.24 µW h cm-2 and 12.5 mW cm-2, respectively. Besides, this supercapacitor device exhibited good cycle life performance, with 79.03% capacitance retention after 10,000 charge/discharge cycles. These results suggest practical applications for these PPyNP/f-CNT freestanding composite electrode-based symmetric all-solid-state supercapacitors.

Conjugated Copolymers through Electrospinning Synthetic Strategies and Their Versatile Applications in Sensing Environmental Toxicants, pH, Temperature, and Humidity.

Conjugated copolymers (CCPs) are a class of polymers with excellent optical luminescent and electrical conducting properties because of their extensive π conjugation. CCPs have several advantages such as facile synthesis, structural tailorability, processability, and ease of device fabrication by compatible solvents. Electrospinning (ES) is a versatile technique that produces continuous high throughput nanofibers or microfibers and its appropriate synchronization with CCPs can aid in harvesting an ideal sensory nanofiber. The ES-based nanofibrous membrane enables sensors to accomplish ultrahigh sensitivity and response time with the aid of a greater surface-to-volume ratio. This review covers the crucial aspects of designing highly responsive optical sensors that includes synthetic strategies, sensor fabrication, mechanistic aspects, sensing modes, and recent sensing trends in monitoring environmental toxicants, pH, temperature, and humidity. In particular, considerable attention is being paid on classifying the ES-based optical sensor fabrication to overcome remaining challenges such as sensitivity, selectivity, dye leaching, instability, and reversibility.

Synthesis of the diketopyrrolopyrrole/terpyridine substituted carbazole derivative based polythiophenes for photovoltaic cells.

A series of conjugated polythiophenes (PTs) having low band gap energies (PDPP, PDPCz21, PDPCz11), with 2-ethylhexyl-functionalized 2,5-thienyl diketopyrrolopyrrole (TDPP) as the electron acceptor and terpyridine-substituted carbazole (TPCz) as the electron donor, have been synthesized and studied for their applicability in polymer-based photovoltaic cells (PVCs). The thermal stability and solvent solubility of PTs increased upon increasing the content of the TPCz derivative. PVCs were fabricated having the following architecture: indium tin oxide/poly(3,4-ethylenedioxythiophene):polystyrenesulfonate/PT:6,6-phenyl-C71-butyric acid methyl ester (PC71BM)/Ca/Ag. The compatibility between the PT and PC71BM improved upon increasing the TPCz content. The photovoltaic properties of the PDPCz21-based PVCs were superior to those of their PDPP- and PDPCz11-based counterparts.

Interaction of LiYF4:Yb3+/Er3+/Ho3+/Tm3+@LiYF4:Yb3+ upconversion nanoparticles, molecularly imprinted polymers, and templates.

In this work, LiYF4:Yb0.25 3+/Er0.01 3+/Tm0.01 3+/Ho0.01 3+@LiYF4:Yb0.2 3+ upconverting nanoparticles (UCNP) were used as luminescent materials for the preparation of molecular imprinting polymer nanocomposites. Three luminescent molecularly imprinted polymer (MIP) nanocomposites were prepared by in situ polymerization. The relationship between the functional monomers, templates, and upconversion nanoparticles was investigated. Two hydrophilic monomers (acrylic acid (AA) and acrylamide (AAm)) and one hydrophobic monomer (N-tert-butylacrylamide (TBAm)) were employed as functional monomers, while one amino acid (cysteine) and two proteins (albumin and hemoglobin) were employed as the templates to investigate the effect of their interaction with LiYF4:Yb3+/Er3+/Ho3+/Tm3+@LiYF4:Yb3+ core/shell UCNPs on the polymerization process, luminescence properties, and adsorption capacity. The results showed that the UCNPs were embedded in the polymeric matrix to form an irregular quasimicrospherical UCNPs@MIP with diameters ranging from several hundred nanometers to several micrometers depending on the functional monomer. The quenching effect was more pronounced for the adsorption of hemoglobin with UCNPs@MIP compared to cysteine and albumin. In addition, the adsorption capacities of the AA- and AAm-made UCNPs@MIP were greater than those of TBAm-made UCNPs@MIP. The rebinding of the templates onto UCNPs@MIP was very fast and approached equilibrium within 30 min, indicating that the synthesized UCNPs@MIP can be employed as fluorescent probes to offer rapid detection of molecules.

Dual Stimuli-Responsive Block Copolymers for Controlled Release Triggered by Upconversion Luminescence or Temperature Variation.

An amphiphilic block copolymer (BCP) which contains both photoresponsive and thermoresponsive blocks was synthesized by the atom transfer radical polymerization approach. Meanwhile, a new core/shell type of the upconversion nanoparticle (UCNP) LiYF4:Yb3+ 0.25,Tm3+ 0.01@LiYF4:Yb3+ 0.2 was successfully synthesized. By encapsulating UCNPs inside the micelles of the BCP and incorporating Nile red (NR) into the UCNP@BCP hybrid nanoparticles as a model drug, controlled release of the drug by the dual-stimuli BCP could be studied. After exposing the UCNP-loaded micellar solution to near-infrared (NIR) light, it was found that the UV light pumped from UCNPs could disrupt the polymer micelles and the fluorescence intensity of NR decreased with the increase of the irradiation time of the NIR light. The thermoresponsive study indicated that the fluorescence intensity of NR decreased with the increase of temperature of the micellar solution because of the release of NR into water arising from the contraction of the amphiphilic BCP.

MAPbI3 Incorporated with Carboxyl Group Chelated Titania for Planar Perovskite Solar Cells in Low-Temperature Process.

Low-temperature, solution-processed, highly efficient hybrid organic/inorganic perovskite planar heterojunction solar cells were fabricated by incorporating reactive crystalline titania (h-TAc) into MAPbI3 layers. The h-TAc was prepared by the sol-gel reaction at low temperature followed by solvothermal treatment. The photoelectrical properties of the solar cells with h-TAc were analyzed. The incorporation with 0.85-wt% h-TAc showed the highest power conversion efficiency (PCE, 15.9%), increasing 69% compared to the pristine cell. The enhancement arose from large-grained microstructures, leading to a low rate of charge recombination. The carboxyl groups chelated on the surface of h-TAc revealed a strong attraction to lead ions, which are significantly helpful to MAPbI3 crystal growth.

Blood-typing and irregular antibody screening through multi-channel microfluidic discs with surface antifouling modification.

A novel surface modification technology for microfluidic disks was developed for multichannel blood-typing detection and irregular antibody screening. The antifouling material, poly(ethylene glycol) methacrylate (PEGMA), was used to modify the surface of the microfluidic disk for improving its hydrophilicity and blood compatibility. With the modification of PEGMA, the hydrophilicity was sufficiently improved with a 44.5% reduction of water contact angle. The modified microfluidic disk also showed good biocompatibility with a reduction of hemolytic index (from 3.4% to 1.2%) and platelet adhesion (from 4.6 × 104/cm2 to 1.9 × 104/cm2). Furthermore, the PEGMA modification technique conducted on the microfluidic disk achieved successful adjustment of burst frequency for each chamber in the microchannel, allowing a sequential addiction of reagents in the test protocol of manual polybrene (MP) blood typing. Clinical studies showed that the proposed MP microfluidic disk method not only performed at extremely high consistency with the traditional tube method in the identification of ABO/RhD blood types, but also accomplished an effective screening method for detecting irregular antibodies. In conclusion, this study demonstrated that the easily mass-produced MP microfluidic disk exhibited good blood-typing sensitivity and was suitable for clinical applications.

Redox-Responsive Heparin-Chlorambucil Conjugate Polymeric Prodrug for Improved Anti-Tumor Activity.

Polymeric prodrug-based delivery systems have been extensively studied to find a better solution for the limitations of a single drug and to improve the therapeutic and pharmacodynamics properties of chemotherapeutic agents, which can lead to efficient therapy. In this study, redox-responsive disulfide bond-containing amphiphilic heparin-chlorambucil conjugated polymeric prodrugs were designed and synthesized to enhance anti-tumor activities of chlorambucil. The conjugated prodrug could be self-assembled to form spherical vesicles with 61.33% chlorambucil grafting efficiency. The cell viability test results showed that the prodrug was biocompatible with normal cells (HaCaT) and that it selectively killed tumor cells (HeLa cells). The uptake of prodrugs by HeLa cells increased with time. Therefore, the designed prodrugs can be a better alternative as delivery vehicles for the chlorambucil controlled release in cancer cells.

Facile, Scalable, Eco-Friendly Fabrication of High-Performance Flexible All-Solid-State Supercapacitors.

A highly porous freestanding supercapacitor electrode has been fabricated through a simple, inexpensive, bulk-scalable, and environmentally friendly method, without using any extra current collector, binder, or conducting additive. Benefiting from its unique micro-tubular hollow structure with a thin cell wall and large lumen, kapok fiber (KF) was used herein as a low-cost template for the successive growth of polypyrrole (PPy) through in situ chemical polymerization. This PPy-coated KF (KF@PPy) was blended with functionalized carbon nanotubes (f-CNTs) to form freestanding conductive films (KF@PPy/f-CNT) through a simple dispersion and filtration method. The hybrid film featuring the optimal composition exhibited an outstanding areal capacitance of 1289 mF cm-2 at a scan rate of 5 mV s-1. Moreover, an assembled all-solid-state symmetric supercapacitor featuring a PVA/H2SO4 gel electrolyte exhibited not only areal capacitances as high as 258 mF cm-2 (at a scan rate of 5 mV s-1) but also excellent cycling stability (97.4% of the initial capacitance after 2500 cycles). Therefore, this efficient, low-cost, scalable green synthesis strategy appears to be a facile and sustainable way of fabricating high-performance flexible supercapacitors incorporating a renewable cellulose material.

A star-shaped conjugated molecule featuring a triazole core and diketopyrrolopyrrole branches is an efficient electron-selective interlayer for inverted polymer solar cells.

A novel triazole-cored, star-shaped, conjugated molecule (TDGTPA) has been synthesized for use as an electron-selective interlayer in inverted polymer solar cells (PSCs). This star-shaped molecule comprised a triazole unit as the central core, 2,5-thienyl diketopyrrolopyrrole units as π-conjugated bridges, and tert-butyl-substituted triphenylamine units as both end groups and donor units. The inverted PSC had the device structure indium tin oxide/ZnO/TDGTPA/poly(3-hexylthiophene) (P3HT)/fullerene derivative (PC71BM)/MoO3/Ag. Inserting TDGTPA as the electron-selective layer enhanced the compatibility of the ZnO-based electron transport layer and the P3HT:PC71BM blend-based photoactive layer. The low energy of the lowest unoccupied molecular orbital (-3.98 eV) of TDGTPA was favorable for electron transfer from the photoactive layer to the ZnO layer, thereby enhancing the photovoltaic performance of the PSC. The photo-conversion efficiency of the device incorporating TDGTPA as the electron-selective layer was 15.8% greater than that of the corresponding device prepared without it.

Enhanced Optoelectronic Conversion Efficiency of CdSe/ZnS Quantum Dot/Graphene/Silver Nanowire Hybrid Thin Films.

In this study, we prepared the reduced graphene oxide (rGO)-CdSe/ZnS quantum dots (QDs) hybrid films on a three-layer scaffold that the QD layer was sandwiched between the two rGO layers. The photocurrent was induced by virtue of the facts that the rGO quenched the photoluminescence of QDs and transferred the excited energy. The quenching mechanism was attributed to the surface energy transfer, supported in our experimental results. We found that the optoelectronic conversion efficiency of the hybrid films can be significantly improved by incorporating the silver nanowires (AgNWs) into the QD layer. Upon increasing AgNW content, the photocurrent density increased from 22.1 to 80.3 µA cm(-2), reaching a near 3.6-fold enhancement compared to the pristine rGO-QD hybrid films. According to the analyses of photoluminescence spectra, shape effect, and electrochemical impedance spectra, the enhancement on the optoelectronic conversion efficiency arise mainly from the strong quenching ability of silver and the rapid electron transfer of AgNWs.

Adjustable bioadhesive control of PEGylated hyperbranch brushes on polystyrene microplate interface for the improved sensitivity of human blood typing.

A PEGylated 96-well polystyrene (PS) microplate was first introduced for applications in high-throughput screening for selective blood typing to minimize the risks in blood transfusions. Herein, we present a hemocompatible PS 96-well microplate with adjustable PEGylated hyperbranch brush coverage prepared by ozone pretreated activation and thermally induced surface PEGylation. The grafting properties, hydration capacity, and blood compatibility of the PEGylated hyperbrush immobilized PS surfaces in human blood were illustrated by the combined chemical and physical properties of the surface, and the dependence of the specific absorption of human plasma fibrinogen onto the PEGylated surfaces on the grafting density was analyzed by monoclonal antibodies. The surface coverage of PEGylated brushes plays a major role in the bioadhesive properties of modified PS microplates, which in turn control the level of agglutination sensitivity in blood typing. The bioadhesive resistance toward proteins, platelets, and erythrocytes in human whole blood showed a correlation to the controlled hydration properties of the PEGylated hyperbrush-modified surfaces. Therefore, we suggested that the surface coverage of PEGylated hyperbrushes on PS surfaces can increase the sensitivity of cross-matching blood agglutination by up to 16-fold compared to that of the conventional 96-well virgin PS due to the regulated biorecognition of hematocrit and antibodies of the PEGylated hyperbrush-modified surfaces.